Basic Info.
Style for Purifier
Cabinet
Water Purification Efficacy
Straight Drink
Water Temperature
Warm,Regular Water
Descaling Function
Descaling Function
Pipe Design Rate
Self-Cleaning
Using Site
Table ,Countertop ,Desk
Specification
50.5*27.5*49.5cm
Product Description
- Before using please read the introduction manual carefully
- Keep the explaining right of introduction in our company
- After read keep it with invoice together
Attention matters - Attention matter
Alarm : the signal reminds user to the operation has the dangerous voltage or harmfully for body.Attention : the signal reminds user to the important operation of the good or the warranty introduction The machine is applied for 220V ~ power ,should single use the rated current >= 10A above with grounding line with the tee core socket of leakage protection .Please do not disconnect or revise the water purifier ,or will cause the fault or leakage water accident .Please do not change the power line.If the power soft line is damaged ,for avoiding dangerous ,it muse be changed by manufacture ,repairing department Please do not put heavy good on the water purifier ,or it will damage the through water components inside the water purifier ,cause the leakage water .Avoid putting on the direct sunlight or outdoor place ;please do not put the water purifier storage or expose below 0 degree environment .When there is a fault on the water purifier ,please immediately cut off the power .Please do not put the water purifier on the place that children can touch it ,avoid children's touching .Please use it on the dry place of 4-40 degree.Over 24 hours ,do not use the water purifier ,please close the power .Please keep the normally operation of water purifier ,please make sure use the appliance and filter core.Before moving the water purifier ,please empty the original water tank and continuously fetch normally temperature water ,till the water purifier can not outlet water.Fetch the "blunt milk " water ,please attention the water temperature of " blunt milk " is suitable ,avoid burns .Firstly use or use it again off power ,both put on a normally temperature water ,then put other hot water .2 .package lists Series | Name | Qty |
1 | Mainly device (include the original filter core 2 pieces ) | One set |
2 | Introduction manual | One pcs |
3 | Water pans | One pcs |
| | |
1 .display panel 2 .touching control pushing key 3 ,outlet water mouth 4.fetching water pans cover 5. fetching water pans 6.powerfully line 7. Original water tank 8. Original water tank cover :make water : milk : coffee :making tea :change water : lack of water :sterilization bacteria :water pushing button : fetch water push button : fetch water : Children lock :children lock push button : model : model type push button Attention : For improve the feature of product ,please standard it through the practical good. - : product mainly parameters :
The product is the counter top water dispenser ,no any installation , insert electricity and use it ; 4 stage adjustable temperature velocity thermal system ,suit multi drinking water request ,the product adopts the advantaged technology of RO reverse osmosis water treatment ,can ensure your drinking water is purified ,based on the human's operation designing and make you enjoy the healthy life with high technology .The product has the smart controlling function ,ensure the stable outlet water quality ,3 stage filtration , can filter out the heavy metal /organic matter etc.substance in the water ;also can reduce the volume of including salt ,soften the water quality .Classic and concise appearance, stylish and generous, can be integrated with modern room decoration. Rated voltage | 220V~ |
Rated frequency | 50Hz |
Rated power | 2200W |
Making hot water ability | 27L/h (>=90 degree) |
Consumable electricity | 0.1kW.h/24 h |
Purified water flow | 0.19L/min |
Rated total purified water flow | 2000L |
Original water tank volume | 5L |
Purified water tank volume | 2L |
Ambient temperature | 4-40 degree |
Relative humidity | <=90% |
Application water temperature | 5-38 degree |
Avoid contacting electricity protection type | I type |
Protection water rating IP code | IPX0 |
Using zone | The municipal water tap water |
Operation standard | GB47061-2005 GB470619.2008 QB174144-2010 |
Outlet water quality | Suit for << life drinking water water quality dealing device sanitary safe and function reviewing rule -reverse osmosis dealing device>> (2001) request |
- Craft principle diagram
: original water tank :strong water tank self sucking pump : combined flushing valve : combined filter cores :reverse osmosis membrane filter core : water suction pump : purified water tank UV : UV sterilization lamp : silicon controlled : single direction valve : heating hot body :outlet water mouth Note : The specific location of the filter element shall refer to the actual product, and the water circuit diagram shall be consistent - Electrical principle diagram
:heating model : temperature sensor () : protection temperature controller (manual reset ) ; :temperature sensor : proximity switch : water position sensor :water position float ball : sucking water pump : combined flushing valve : self-sucking pump : heating model - Product function
Filter core item | Function | Suggest replacement period |
PP +CTO combined filter core | Initial filtration ,effectively intercept rust ,sediment,suspended solids etc. Solid impurities ,absorb residual chlorine etc. Disinfection by -products ,filter out odor ,peculiar etc. | 6 months |
RO membrane | Effectively intercept escherichia coli,lead, arsenic ,cadmium ,chromium etc heavy metal . | 24 months |
Reference : because the difference of water quality ,the replacement cycle time has different . : installation and using - Installation method
- Put the water dispenser on the cool ,ventilation ,stable grounding ,far away from the hot source.For ensure drinking quality ,please use the salable product filter core in the company.
- Add water.Open original water cabinet cover ( Picture 1 ) ,upward raise off the original water tank , full water in the original water tank ,reinstall the back of the product( picture 2) ,and cover the original water tank well . if the original water tank is not put in suitable position ,the machine can not work normally.
- Power connection .Put the plug of power to insert into the powerfully socket ,the machine sends a " Ding" sound and make the showing panel and touching key bright ,shows the machine has entered into the working status .
- Installation flushing : initial using has the air bubble ,granule ,weak mouth feeling is the normally phenomenon ,need to empty normally temperature water 3 times.and select the " making tea " ,run off 1 litre hot water to flush the machine , after completion, please pour out the waste water in the original water tank and change the water again before use.
Note : the product is just applied for AC 220V power ,and should single use the 10A or rated 10A above with grounding socket - Using method
- Firstly using ,need to observe whether there is water flowing out of the product or water around the product when the machine is energized and enters the running state,if find the above condition ,please off the powerful connection and contact with client's service .
Initial using please flush it according to following processing : - Original water tank is added 5L water fully ,the machine begins to work ,when the lamp of making water is put out that can do other operations
- Touch and push the fetching water 5 seconds ,can continuously draw off water for about 5 minutes,and empty the pure water tank .
- Pour out the remaining water in the original water tank and the discharged water together, and refill the original water tank
- Repeat the processing of (1) -(3) ,
Long term has no using , should fetch 3 litre water and emission ,and ensure the fresh and healthy of drinking water .When using processing ,if find the abnormal sound ,anxious burnt flavour ,smoking etc,please off powerfully connection and contact with clients' service center.- 3.operation introduction manual
- Power on : after power on all lamps are bright and flash 2 seconds,buzzer seconds sound twice.
- Flushing : power on flushing 30 seconds; every time full water or super heighten water position ,leakage voltage 10 seconds;every time making water before flushing 18 seconds,flushing finishing later and again operated making water.
- Make water : machine enters making water status " making water " words white often flashing ,icon white color often flashing .Machine continuously make water status 30 minutes ,has not full water ,the whole machine enters the stopping machine protection status ."888" icon shows E3, " making water " icon white color flashing ,and the buzzer flash songs 10 times, alarm and the meantime stop making water .The machine back to electricity ,and the machine return the stopping machine and protection status.
- Change water : the machine test the lacking water in the original water tank and enter into the change water status and leakage voltage 10 seconds,with alarm 10 sounds," change water " icon white color flashing .when test the lacking water of original water tank ,only lift the water tank and finish changing water can return the status of change water; diirectly add water and can not return the original water tank leakage water status with alarm 10 sound," change water " icon white color often bright.
- Lacking water : when continuously monitor the lacking water in the purified water ," lacking water " icon white flashing ,machine starts making water ; lacking water status force to stop starting ,heating ,outlet water function .
- Life of filter core
- The life word of filter core "PAC .RO" ,power on the white color often brights; the indicator lamp of filter core life often white color half bright ,the life of filter core Subsection expiration diminishing expiration; when the life of filter core expires date ,the machine still start to make water normally ,heating function .
- The life of filter core reset : long push " children's lock " push button for 3 seconds and enter into filter core reset setting status ,buzzer songs twice secondly ,the "PAC " of filter core flash quickly ;lightly touch "children's lock " push button and select the filter core of reset , filter core "RO/PAC " cycle ,select the icon flashing of that filter core; again long push " children's lock " push button 3 s and enter into clear zero reset status of filter core life ,and the filter life indicator lamp is extinguished and the buzzer songs 3 times and shows the reset is successfully ,and at the mean time return the setting status.If it is not operated within 10 seconds, automatically return the setting status .
- UV sterilization : the sterilization lamp is working ,sterilization icon is white color flashing secondly ;the UV sterilization lamp is not working ,the sterilization icon is extinguished .
- Children's locking : the opening function of whole power on children's locking ,"children's locking " word and icon are white color often bright .Lightly touch push button of children's lock,the buzzer songs 1 time and the function of children's lock is closed ,icon of children's lock is extinguished .Again lightly touch the push button of children's lock ,open the function of children's lock.
- Model
The whole machine is power on " model " function is opening and the word and icon are often bright .Lightly touch "children's lock " push button and close the function of " children's lock ",lightly touch " model " push button ,and select "blunt milk/coffee/making tea/normal temperature " heating and outlet water temperature ,select " blunt milk " , " blunt milk " indicator lamp is often light ,select " coffee,making tea " above ;select normally temperature water ,"888" indicator lamp flashing ; if not select the outlet water temperature ,the system default heating temperature is : making tea. - Water volume
The whole machine of power on " water volume " function is power on , " water volume " word and icon are often bright ,lightly touch " water volume " push button and select " 80mL/180mL/300mL/500mL "outlet water total volume ,select "80mL ", "80mL " indicator lamp often bright ,select " 180mL/300mL /500mL " above ; if not select the outlet water volume ,the system defaults each water output volume : 180mL.- Fetch water
- the whole machine power on " fetching water " function is open and the word and icon white colors often bright.
- Light touch " fetching water " push button ,the machine outlets normally temperature water ; among the processing of outlet water again lightly touch any key,the machine is stopped for outlet water.
- Lightly touch " children's lock " push button ,close the function of " children's lock " ,again lightly touch " model " push button and select the heating temperature, again lightly touch " fetching water " push button ,the machine is outlet hot water ; on the processing of outlet water ,again touch any push button ,the machine stops outlet water .
- Emptying : under the condition of water purifier tank has water ,long push " fetching water " push button 5 seconds ,start the program of evacuation drain ,the buzzer songs 1 time and the icon of " fetching water " is extinguished ,close the function of emptying .
- Waiting machine : five minutes no any operation ,the machine enters the status of waiting machine ,indicator lamp brightness is halve :waiting for the machine latter ,initially touch the any push button and wake up the machine ,indicator lamp is showed normally ,again touch the enable the corresponding function .
- Initially power on 15 seconds ,long push " water volume " push button 5 seconds ,the machine automatically enters the temperature calibration procedure of the tea brewing water outlet,finish the calibration latter ,automatically keeping ( enter into the calibration processing that need to ensure the purified water tank has the enough water )
4.The replacement of consumption material 1. the product consumption material replacement must use the real thing consumables in the company ,and ensure the safety of drinking water .If has any abnormal situation of replacement consumable material ,please contact with clients' service center and deal with it. - Flushing of stainless steel filtration mesh
- The using of machine overs 3 months ,for ensuring the opening of water and extend the using life of filter core ,need to fetch out the stainless steel filtration mesh combined components ,and use the small hairbrush and flush inside and outside of machine.
:stainless steel filtration mesh combined components - Please fetch out according to the following processing :
- Open the original water tank cover and wait for 5 seconds
- Lift the original water tank and put in the horizontal plane
- Take out the stainless steel filtration combined components ,,and use the small hairbrush and clear the inside and outside surface of net
- Use the small hairbrush and clear it ,then return to the specified position of the original water tank .
- Consumable material replacement
- PP + CTO combined , the replacement of RO filter core and reset ,when the plate panel of PAC/RO indicator lamp flashes ,indicator the N0.1 stage PP + CTO combined filter core ,NO.2 reverse osmosis membrane filter core that needs to change it ,please off the electrical power and replace them according to the following stepping processing .
- Open the original water tank cover
- Lift the water tank and put on the ground
- Grasp PP + CTO combined filter core and rotate it with counter clockwise ,and disconnect the filter core.
- Grasp the reverse osmosis membrane filter core and rotate it with counter clockwise ,disconnect the filter core of reverse osmosis membrane
- Grasp the new PP + CTO combined filter core and insert into the bottom of filter core and rotate it with clockwise ,till the filter core focusing point and the focusing point of filter core base are the same .
- Common dealing of fault
- Super over 106 degree alarming showing : heating body NTC feeling temperature or over 106 degree alarm , "888" picture icon shows E1,other indicator lamp shows normally .
- Outlet water temperature sensor fault : "888" icon shows E1 ,and other indicator lamp shows normally .
- Inlet water sensor fault : "888" icon shows H1,other indicator lamps shows normally.
- The inlet water temperature lower than 0 degree, water road has the fault of ice: "888" icon shows E5,other indicator lamps shows normally.
- Electrical voltage sensor faults : "888" icon shows H2,other indicator lamps shows normally .
- Telecommunication fault : when has the abnormal fault on the telecommunication ,"888" icon shows E9,other indicator lamp shows normally .
- Over zero information signal fault : "888" icon shows E7 ,other indicator lamp shows normally
- Fault of machine :
- 106 degree super temperature : heating body on the NTC feeling temperature reaches or super 106 degree alarm ,the machine can outlet normally temperature water and,forbidden outlet hot water ,and the temperature of film surface is lower than 50 degree to resume normal working .
- Outlet water temperature sensor fault : the shortage of sensor or breaking circuit ,the machine can outlet normally temperature water ,forbidden outlet hot water ,when the fault is eliminated ,it can be work.
- Inlet water temperature sensor fault : the sensor is shortage or off circuit ,the machine can outlet normally temperature water ,forbidden outlet hot water,when the fault is eliminated ,it can be work.
- The inlet water temperature lower than 0 degree,water road has the fault of ice: the machine is forbidden outlet water ,when the fault is eliminated ,it can work.
- The fault of electrical voltage sensor : the machine can outlet normally temperature water and hot water ,when the fault is eliminated , it can refresh work.
- Telecommunication fault : the machine is forbidden outlet water ,when the fault is eliminated ,it can work .
- The fault of signal of over zero : the machine can outlet normally temperature water ,forbidden outlet hot water ,when the fault is eliminated ,it can work.
Common phenomenon | Possible reason | Solution methods |
Can not fetch normally temperature water | The machine no any through electricity ,finger is not pushed on suitable position .inside the machine there isn't lacking water ," lacking water " icon flashes showing | Check the plus of power is loose or not insert into the position Retouch push button and go on the operation of fetching water
Waiting for moment ,latter when the " making water " icon is often bright.
Lacking water icon is extinguished ,can fetch water normally |
Can not fetch hot water | Initial connect to power or reconnect to powerful machine ,enter into " protect dry burning protection " The machine enters the status of " drying alarm " | Firstly fetch a small cup of warm water ,then fetch other warm water of temperature . Please fetch several times normally temperature water,then fetch other temperature water |
The machine can not make water | The original water tank liquid level float does not float. The water level of the original water tank is lower than the dotted line scale of the original water tank and the "change water" icon flashes Original water tank has not installed on the corresponding position
| Check original water tank liquid level float is floats up or not . Please lift original water tank and change water ,then observe the machine is entering the status of " making water " Check the original water tank is installed rightly or not. |
The sound of making water is abnormal sound | The water level of the original water tank is lower than the dotted line scale of the original water tank
Making water system is air blockage
Water quality is more hard or more weak ,combined filter core or reverse osmosis membrane filter core pre blocked | Please lift the original water tank and change water ,then observe the making water whether has the abnormally sound , Machine powers on electricity ,flush 1-3 seconds Change the combined filter core or RO filter core later ,observe them again |
Leakage water of machine | Water track is full be stucked or rushed out of the check valve of the original water tank seat Leakage of inside the machine | Empty the fetching water pans tray. Use a small thimble to adjust the check valve to its position or contact customer service to replace the check valve
Use a small thimble or finger Withstand the action of the sealing valve and remove foreign objects
Close the power or water source ,please contact with service of company. |
Peculiar smell or odor in the water | Begin to use the new machine The machine is not used in long time
The filter core is not changed immediately | Fetch 6L water and drain it ,then can use it. Fetch 6L water and drain it ,then can use it. Replace the filter core ,please contact with clients service of the company |
Leakage electricity or with induction electricity in the machine | The connecting ground is not well ,powerfully soft line is broken | Must use reliable tee hole socket in the grounding Please contact with the service in the company |
Push button key /display screen no any reaction | Damaged hardware
System is dead | Please contact with the service in the company
Close the 1-2 minutes power ,then reconnect with power |
Environmental protection service using life China toxic substance declaration For suit relevant law.ruling and other requirements of China electronic electrical products harmfully material limited ,our company through a detailed internal investigation ,trough the component and classification ,the statement is as following : Electrical good name : reverse osmosis water purifier |
Components name | Harmful substances |
Filter core | Lead(Pb) | Mercury (Hg) | Cadmium(Cd) | Hexavalent chromium (Cr ( Vl) | PBB | PBDE |
Original water tank | Ο | Ο | Ο | Ο | Ο | Ο |
Solenoid valve | Ο | Ο | Ο | Ο | Ο | Ο |
Self-priming pump | Ο | Ο | Ο | Ο | Ο | Ο |
Water suction pump | Ο | Ο | Ο | Ο | Ο | Ο |
Rubber seal components | Ο | Ο | Ο | Ο | Ο | Ο |
Computer plate components | × | Ο | × | Ο | Ο | Ο |
Other metal structure | × | Ο | Ο | × | Ο | Ο |
Electrical adapter | × | Ο | Ο | Ο | Ο | Ο |
Plastic components | Ο | Ο | Ο | Ο | Ο | Ο |
Line material | Ο | Ο | Ο | Ο | Ο | Ο |
Storage water tank | Ο | Ο | Ο | Ο | Ο | Ο |
Powerful line | × | Ο | Ο | Ο | Ο | Ο |
Package printing | Ο | Ο | Ο | Ο | Ο | Ο |
This form is prepared in accordance with SJ/T 11364 .Some types of products may not include part of the table ,electronic control board components include components ,PCB,Terminals ,etc.Reference : O : indicates that the content of the harmful substance in all homogeneous materials of the components is in the limits specified in GB/T 26572 are as follows. × :denotes that the hazardous substance in at least one homogeneous material of the part exceeds the limit requirements specified in GB/T 26572.The parts marked "×" can not be replaced by harmful substances due to the limitation of the technical development level of the industry 10 The electronic information products sold within the territory of the People's Republic of China must bear this logo .The number in the circle represents the environmentally friendly life of the product in the normally using status . FAQ
1.Q:Are you manufacturer ?
A:Yes, we are the manufacturer with continuous and improved R&D, Production, Quality Check and service supply.
2.Q:What's your main products ?
A: Our products is water dispensers filters softeners, control valves, RO water purifiers, housing filters, all kinds of filter components and so on.
3.Q:Can I get your price list ?
A: Yes, sure. In order to send you our available offered price, please choose the products and let us know the product model and requirement in detail.
4.Q: What's your after-sales policy( The terms of guarantee) ?
A: Different products, different guarantee policy.The time of quality guarantee: 3-5 year.
5. Q: What's your payment policy?
A: Samples(Less than 3000USD): 100% in advance via T/T or West UnionFormal order: 30% payment in advance via T/T as deposit payment and balance payment will be done against the Copy of B/L L/C payment is also available.
6.Q: Can I get your products with our logo and design ?
A: Most of products are OEM or ODM with your logo and design.
Address:
No. 23 Qianshui East Road, Hefei, Anhui, China
Business Type:
Manufacturer/Factory
Business Range:
Consumer Electronics, Electrical & Electronics
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 14000
Company Introduction:
Anhui Viano Water Purification Technology Co., Ltd which is founded on 2007
Name: Anhui Viano Water Purification Technology Co., Ltd.
Located In Hefei, Anhui Province, China
Established: In 2007.
Business: OEM/ODM Manufacturer & Exporter Of All Kinds Of Water Purifiers.
Infrastructure: 1.36000 Factory.
2. Moulding Workshop.
3. Metal Forming Workshop.
4. Plastic Injection Molding Machining Workshop.
5.6 Assembly Lines.
6. R&D Center.
7. Performance Testing Room.
8. Showroom.
Supplying Capacity: Annually Up To 700, 000 pieces
Certificated: Decades Patents; SO9001, ISO14001, QHSAS18001, CCC, CE, RoHS, SASO, etc.
All Products Are Insured By PICC
Enterprise culture
Mission: Become Professional OEM/ODM Supplier
VALUE: Innovation; Quality; High Performance-price Ratio
VISION: From Cooperation To Win-Win
Our development history
2015 May Start Office automation & ERP programs
April Certificated by QHSAS 18001
March Factory Building Finishd.
2014 October 10, 000 square meters new factory building project starts
Agust Donate Water purified products to Ludian earthquack zone.
July China drinking water specialist vist Viano
March 5, 000sqaure meters waterhouse buidling finished
2013 June Established Wide& Long-term Business relationship with domestic famous companies, and annual supplying is up to 170, 000 pieces.
May the second factory starts productions
2011 March First factory starts productions and annual is up to 100, 000 pieces.
2010 December certificted CCC
Aguest OEM division was established.
2007 Viano is founded.
RO water dispenser
Undersink RO water Purifier
RO Cabinet Water Purifier
Filter&UF Filter
Wall-mounted Dispenser
Commercial Water Purifier
Public Water Dispenser
Central Water Softener
Tools
Accseeories