Basic Info.
Style for Purifier
Cabinet
Water Purification Efficacy
Straight Drink
Water Temperature
Warm/ Regular
Descaling Function
Descaling Function
Pipe Design Rate
Incremental
Stage
PP +CTO Compsied Plus RO Filters
Specification
carton dimension: 54*25*65.5cm
Product Description
Attention matterscaution notes 1-2 caution notes 1package lists 2Product profileName of elements 2Mainly product parameter 3craft schematic diagram 3Electrical schematic diagram 4Product function 4Product feature 4 installation and using 5-10installation preparation 5installation and debugging 5operation introduction 6maintenance repairing 8among goods food contacting material lists91,attention mattersThe precautions in this item are only for the correct use this product by the user. The contents are all related to safe use and must be followed. The precautions explain the hazard, the degree of big and small the danger, and the possible accidents that may occur when incorrectly use.1, Please use the good under the pressure of 0.1~0.4MPa in the municipal tap water2, Please do not put heavy good, handle with care.3, Please put the product in the site of having floor drain4,Please do not use the appliance that is not allowed by factory,if cause the fault of machine,the repairing is end5,Please check the product is broken or not after demolition the package,and check the accessories whether are complete.6, If the product has fault ,please close the inlet water valve ,make sure not put fault product on the status of working7, The product making water flow is affected by water quality,water pressure,when water quality is not for standard,water pressure is over lower ,water temperature less than25°C,The water flow rate will be less than the standard value8, When shows the fault,instant cut off power and find the service of after -sales.9, The product is installed or removed by experts,do not remove or install by yourself .10, Do not put the good to contact or near to hot source, fire.11, Meet stop water or repairing pipe,please cut off power switch and close the inlet tee global valveRegular faults dealing 10| environment using year period | 11 |
| maintenance introduction | 12-13 |
| Forbidden the mark that indicated the contents that is forbidden action,or damage the product or user 's safety |
| Avoid sunlight and outdoors Avoid installation in direct sunlight and outdoors place | Antifreeze
Do not store or expose the product in an environment below 0 degrees | Heated
It is forbidden to store flammable, explosive or deformed items near the body |
| Warning The mark that indicated the contents are operated by request or or damage the product or user 's safety |
Fault dealing
When the machine has fault,please immediately cut off water source,electrical source | Forbidden operation people group,don't let children or inability person to operate | Emergency calling
Find after-sales service to help |
| Attention The indicated contents that is fixed by user,otherwise it will cause product damage or other losses due to improper operation |
Maintenance
Do not disassembly the components on the machine,prevent the leakage water and damage of machine | Temperature
Please use it at 4~40°C dry place | Stop using
Over 24 hours not use purifier,please close the water source,power source. |
accessories and filter core
For the normally operation,please use the accessories and filter core with company signal or Anti-counterfeiting label | correct repairing service
Only personnel with professional training and certification designated by the company can repair this machine |
| Name of components | Qty | Reference |
| Main machine | 1 set | |
| Filter core | 4 pcs | |
| USA big bending faucet | 1set | |
| Appliance bag | 1 set | PE water pipe 2 rolls |
| | | Customer's manual(including QC ,repairing card) 1pcs |
| | | Double hole faucet hanging card 1 pcs |
| | | Tee inlet water global valve 1pcs |
| | | 2 fen directly through quick connector 2 pieces |
| | | L type 3 fen plug 1 pcs |
| | | L type 2 fen plug 3 pcs |
| | | Teflon tape 1 roll |
| | | BLUE CARD(2 fen 7 pcs,3 fen 1 pcs) 8 pcs |
| | | expansion spiral tube /screws |
| Product name | RO big flow water purifier |
| Product type | WYN-RO801 |
| Good number | N6 |
| Rated voltage | 220V- |
| Rated frequency | 50Hz |
| Application water pressure | 0.1~0.4MPa |
| Rated purified water flow | 4000L |
| Application water quality | Municipal Tap water |
| Using environment | Ambient temperature 4ºC~40ºC,ambient humidity <=90%(room) |
| Product dimension | 160*450*437mm |
| Outlet water quality | It meets the requirements of "The Hygienic Safety and Functional Evaluation Specification for life Drinking Water Water Quality Processors-Reverse Osmosis Treatment Device H2001). |
| Stage of filter core | Material of filter core | function of filter core |
| No.1 stage | Melt blown polypropylene filter core | Can filter out sediment ,rust,suspended substance,glue,red worm etc.solid impurities |
| No.2 stage | sintered activated carbon filter | Can effectively absorb residual chlorine ,disinfection by -products' organic matters,humus,odor,peculiar color etc. substance |
| No.3 stage | reverse osmosis filter core | Filter out organic matter, microorganisms, chemical residues,'heavy metal' bacteria and other harmful substances in the water |
| No.4stage | post activated carbon filter core | It further absorbs the peculiar smell and color in the water, improves the taste, and makes the water more delicious. |
- Confirm the site of installation Attention the following points
- confirm has the interface of municipal tape water pipe,and the pipe is 4 fen port;and the water pressure less than 0.4MP,larger than 0.4Mpa,please purchase the decrease pressure valve.
- Confirm there is 220V~50Hz power socket
- Confirm there is strong water discharge port in near place
- The site is clean,sanitary ,no pollution,no directly sunshine, no inflammable and explosive ,no rain.Note :using the drilling hole tool,please mention the body 's safety ,and the drilling site hasn't the healed water ,electricity ,gas pipe lines.
2,Installation and debugging 2.1 Prepare maters before installation (1) confirm the installation site (2) confirm the various tools| Adjustable wrench | 1 pcs |
| Electrical drilling | 1 pcs |
| Open hole device ¢29mm | 1pcs (high speed open hole device or marble open hole device |
| Crossing , one screwdriver | Every 1 pcs |
| Pipe scissor | 1pcs |
| 14-16mm wrench | 1 pcs |
| 19-21mm wrench | 1 pcs |
| Sharp -nose pliers | 1 pcs |
- Confirm installed various appliances are completely or not
- Before installation ,do not sending water or electricity77
6,product features1.Self controlling :the whole machine operation status is adopted by self-controlling,for instance ,close the faucet later ,self stopping the machine,the surface of RO membrane is cleaned and flush etc .on time in its self.1, Dynamic LED display, easily see the operation status3)The wading parts are made of food-grade materials, which is safe and secure;4)Purified water meets the standard of raw drinking, cooking, soup, etc. are more hygienic and delicious;5) Filter core replacement indication : the life of filer core is will reach valid term or has reached ,the machine will remind .,Firstly close the inlet water valve ,take off the metal soft pipe on the cold water angle valve .Take out the integrated inlet water tee in the appliance box of water purifier ,put the one end of inside thread on the cold water angle valve ;put the right now metal soft pipe on the outside tread of inlet water tee .- Installation method of inlet water pipe
Fetch the 3 fen PE water pipe on the appliance box,cut it as a suitable length water pipe ,put one end of water pipe to connect integrated inlet water tee,another end of water pipe is connected to water interface that is indicated in "inlet water port" in water purifier,caution water pipe and quickly connector are insert closely ,in order to prevent the accident of leakage water .- Installation of faucet
On the suitable site of platform of fetching water port and drill a diameter 29mm small hole ,then fetch the faucet from the package box,begin to install faucet: firstly unscrew the nut below the faucet ,in queue take the stainless steel bottom plate with protection film ,rubber pad into silk pipe ,through the platform,then again put plastic mat ,internal tooth gasket in queue from the silk pipe of faucet is set into ,set on the nuts ,and fix the faucet on the platform.Cut a suitable length 2 fen PE pipe which is directly connected to water interface that indicated " pure water " in water purifier,then put another end is connected to one of end of quickly connector in bag of accessories,finally insert the another end of quickly connector into one end of faucet " pure water " .In addition cut a suitable length 2 fen PE water pipe ,put one end to connect to interface water that indicated "purified water " in machine,then put another end into the end of quickly connector in accessories bag,finally insert another end of quickly connector into one end of faucet "purified water ",finished installation .If you want to put the faucet on the wall ,please use the hang card of faucet.(when installation,caution close every faucet ,prevent its leakage water,insert blue card into fast connector)| Icon | Description of status |
| Make water | Make water status : icon secondly flash,making water text regularly bright ;no making water status: icon extinguished ,making water text regularly bright. |
| standby | The machine enters the water full status ,standby icon right often bright ,standby text lamp often bright. |
| Flush | - flush status:icon second flash ,flush words often bright;non flush status; icon extinguished,flush text often bright;
- On power flush 30s
- Single or cumulative making water reaches 30 min,among non flush ,flush 18s; if among making water reaches the cumulative time,when water full standby ,again flush 18 seconds;
- Long push : "selection"push button 3 s ,enter into flush status,within 18 s ,no any operation,self return out the status of flushing.
|
| Repair | Continue making water 1 h ,among no full water,machine enters into repair status,repairing icon lamp secondly flash,repairing text lamp often bright ,at the same time buzzer songs 30 seconds |
| Power | On the working status of machine : power icon lamp bright,power text often bright;machine on the non working status,power icon lamp often dark bright,power text lamp often bright |
| Life | The machine is on the working status : life icon lamp,text lamp often bright white color ;when the filter core using life accumulates to before 90% of setting value ,life icon lamp,text lamp white color often bright.When any filter core using life accumulates to setting value of between 90%-100% ,life icon lamp white color flashing,text lamp white color often bright ,When any filter core using life accumulates latter of 100% setting value ,life icon lamp extinguishes,text lamp white color often bright;when the filter core life reset,icon lamp,text lamp often bright in this cycle |
| Life of filter core | The icon lamp of filter core shows red,white |
| reset | On the sleeping,touch "reset,breathing,selection " any push button (buzzer " song" 1 sound),remind "reset,selection" function push button ,it is the function opening status; long push "reset " push button 3s ,enter into setting status(buzzer "song" 1sound), No.1 filter quickly flash;lightly touch "selection "push button and enter into displacement state (buzzer "song" 1sound),in turn 1/2/3/4/1 recycle movement,select it that is quickly flashing,within 10 seconds no any operation ,self return the setting status ;select that reset filter ,again long push "reset " push button 3s that enters into the 0 reset status of filter core life,buzzer "song"1 sound that indicates successfully rest and at time return to the setting status. |
- open the tap water inlet water valve and inlet water ball valve of water purifier ( see the picture 3), plug-in power .
- Open the hand of faucet of pure water,has the water flow,shows the machine can make water ,if has no flow water,check whether the tap water that its has lower water pressure or the fault of high voltage circuit breaker .
- Waiting for further confirmation,water purifier can be used safety.(water purifier)
- filter core
post activated carbon filter core is set by improving the mouth feeling,if the inlet mouth feeling is not good or over valid term of using life,please change it ,or bacteria is growing in the surface of activated carbon ,affect drinking safety .
4.2 filter core replacement attention lists
1 .cutting original water supplying ;
2.take of the plug of power line ;
3 .using the wrench rotate the cover of filter cartridge in anticlockwise ,take out the old filter core and throw it;
4.put the new filter film inside the cartridge,with wrench screw the cover of filter cartridge tighten in clockwise ;
5 .Connect to original water,connect to power water purifier enters normal working status;test machine has leakage water phenomenon again,after letting go of the two boxes of purified water originally made, it can be used normally.
The replace time of filter core completely depends on the water source water quality of customers and using purified water volume and its variation ,if adopt the safe changing frequency,can ensures
The normally operation and the water quality of water purifying.
4.3attention matters
Please turn off the heating switch / turn off the refrigeration switch after the last water release at night, or when you go out during the day, to prevent ice blockage and dry burning.
when the machine has fault,immediately cut off power source and water source,clearing troubleshooting.
every stage purified filter core,please do not deal it by yourself ,please ask professionals to deal with it.
5, food connection material lists in products
| Name of components | material | Operated standard
GB/T17219-1998
Life drinking water output distribution water device and protection material sanitation safety praise laws (2001) | | Name of components | Material of components | Operation standard |
| Connection head | P0M | | PE pipe | PE | GB/T17219-1998 life drinking water output distribution water device and protection material sanitation safety evaluation laws(2001) |
| Water tank | PP | | Hot tank | Stainless steel |
| Filter cartridge | PP | | | PP |
| Inlet solenoid valve | PP/silver golden | | | Carbon |
| Flush solenoid valve | PP/sheetmetal | | | Polyamide |
| self sucking pump | PP/4S gold | | | Carbon |
| | Note :the summary of mainly components of different type products in detailed statement ,the products include the cores or not,with the standard of practical configuration. |
| Phenomenon of fault | Possibly reason | Solution methods |
| | | |
| Self-suction pump no start ,can not make water | - Liquid level circuit breaker failure
- Power(fuses) burning destroyed
- Self-suction pump damaged
| - Repair or change liquid level circuit breaker
- Replace the fuses
- Repair the self-suction pump
|
| Self-suction pump normally start but non-making water | preposition 3 stage filter core blocked- Reverse osmosis film blocked
- Self -suction pump loose voltage
| replace preposition 3stage filter coreschange the reverse osmosis membrane
repair self-suction pump |
| Self suction pump head that leakage water | the film aged or inside water scale blocked between the self suction pump heads | repairing head of self-suction or replace in several days |
| when machine start on the status of self-flushing ,the pump of self-suction sometimes action sometimes stop | the contact of circuit breaker is not good | check and repair relevant circuit |
| The full water of tank cold water can not flow out | - Normally the taking water faucet is broken
- normal temperature water discharge silicone tube bending
| - Change the faucet
- Twist the normal temperature silicone tube straight
|
| The hot bladder is not heated | - Heating temperature controlling over hot protection
- Hot tank drying heating cup
| - Rotate the middle heating and temperature controlling button
- Change heating tank
|
| Cold water faucet can not outlet | ice blocked | close the making cold switch,till the cold faucet has water ,then reopen the making cold breaker,do making cold job |
FAQ
1.Q:Are you manufacturer ?
A:Yes, we are the manufacturer with continuous and improved R&D, Production, Quality Check and service supply.
2.Q:What's your main products ?
A: Our products is water dispensers filters softeners, control valves, RO water purifiers, housing filters, all kinds of filter components and so on.
3.Q:Can I get your price list ?
A: Yes, sure. In order to send you our available offered price, please choose the products and let us know the product model and requirement in detail.
4.Q: What's your after-sales policy( The terms of guarantee) ?
A: Different products, different guarantee policy.The time of quality guarantee: 3-5 year.
5. Q: What's your payment policy?
A: Samples(Less than 3000USD): 100% in advance via T/T or West UnionFormal order: 30% payment in advance via T/T as deposit payment and balance payment will be done against the Copy of B/L L/C payment is also available.
6.Q: Can I get your products with our logo and design ?
A: Most of products are OEM or ODM with your logo and design.
Address:
No. 23 Qianshui East Road, Hefei, Anhui, China
Business Type:
Manufacturer/Factory
Business Range:
Consumer Electronics, Electrical & Electronics
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 14000
Company Introduction:
Anhui Viano Water Purification Technology Co., Ltd which is founded on 2007
Name: Anhui Viano Water Purification Technology Co., Ltd.
Located In Hefei, Anhui Province, China
Established: In 2007.
Business: OEM/ODM Manufacturer & Exporter Of All Kinds Of Water Purifiers.
Infrastructure: 1.36000 Factory.
2. Moulding Workshop.
3. Metal Forming Workshop.
4. Plastic Injection Molding Machining Workshop.
5.6 Assembly Lines.
6. R&D Center.
7. Performance Testing Room.
8. Showroom.
Supplying Capacity: Annually Up To 700, 000 pieces
Certificated: Decades Patents; SO9001, ISO14001, QHSAS18001, CCC, CE, RoHS, SASO, etc.
All Products Are Insured By PICC
Enterprise culture
Mission: Become Professional OEM/ODM Supplier
VALUE: Innovation; Quality; High Performance-price Ratio
VISION: From Cooperation To Win-Win
Our development history
2015 May Start Office automation & ERP programs
April Certificated by QHSAS 18001
March Factory Building Finishd.
2014 October 10, 000 square meters new factory building project starts
Agust Donate Water purified products to Ludian earthquack zone.
July China drinking water specialist vist Viano
March 5, 000sqaure meters waterhouse buidling finished
2013 June Established Wide& Long-term Business relationship with domestic famous companies, and annual supplying is up to 170, 000 pieces.
May the second factory starts productions
2011 March First factory starts productions and annual is up to 100, 000 pieces.
2010 December certificted CCC
Aguest OEM division was established.
2007 Viano is founded.
RO water dispenser
Undersink RO water Purifier
RO Cabinet Water Purifier
Filter&UF Filter
Wall-mounted Dispenser
Commercial Water Purifier
Public Water Dispenser
Central Water Softener
Tools
Accseeories
){kind=link}